Enerdrive-The Wanderer Power System
With Enerdrive breaking into the 4WD canopy market in recent years, we have been consistently asked by manufactures and end users to come up with a compact power solution to operate all of the electrical equipment that is ending up in the back of these canopies. From a simple system to operate a fridge and a couple of lights to a full on power station, these are the type of systems we have been asked for.
After many brainstorming sessions and 3D modelling designs, Enerdrive have produced 4 models to cover just about any customer request for power in their canopies.
Via intelligent use of the Inverter/Charger Combi, The Wanderer is able to provide a more compact solution compared to The Adventurer. Available in 2 different versions;
- K-WANDERER-R Driver’s side version
- K-WANDERER-L Passenger’s side version
The Wanderer consists of the following items:
- Enerdrive ePOWER DC2DC40+ Vehicle/Solar Charger
- Enerdrive 12V 1600W/60A Inverter/Charger Combi
- High quality HD Reset circuit breakers for Loads, DC2DC and Inverter/Charger
- 4 x ‘Push to Reset’ breakers for minor loads
- 4 x Carling Switches
- Your choice of Twin USB 2.4A Hi Amp sockets to charge your mobile devices or mix it up with a 12v Output Socket
- Simarine LCD Battery WIFI Monitoring System with option to incorporate individual load/charge information
- Comes supplied with black CMS 15A inlet with RCD protection along with 5m inlet cable (Shorter lengths also available)
- Combi Unit installed with 1.5m of 50mm2 positive and negative cables to ensure you have all the necessities for the install
All Wanderer systems are pre-wired by Enerdrive so the only cabling required at installation time is load outputs, battery connection & vehicle/solar/tank inputs.
All systems are built into a unique compact box arrangement and designed to mount for example on either the front or rear bulkhead of a vehicle canopy. The systems are available in either Left (passenger side) or Right (drivers side) installation. Any brand of battery is suitable from Wet Sealed, AGM, Gel and Lithium.
If you are interested in having custom engraving for switch/circuit breakers to your specific requirements, this option is available at an additional cost.
Enerdrive are proud to bring to market this innovative design that can be installed by the manufacturer or end user in a neat one piece installation.
|Items Included||The Wanderer|
|ePOWER DC2DC 40+ Charger (Vehicle/Solar)||*|
|ePRO 12-1600W/60A Inverter/Charger Combi
|Simarine LCD Battery WIFI Monitoring System||*|
|ePRO Combi Remote Control Unit||*|
|3 x Main Breakers, Inverter, DC2DC, Loads||*|
|4 x ‘Push to Reset’ Breakers for Minor Loads||*|
|4 x Contura Switches||*|
|Twin USB 2.4A Hi Amp Sockets||*|
|Cig Socket to Replace One or Both USB Sockets. (Please Request at Time of Order)||Optional|
|CMS 230VAC 15A Inverter RCD Safety Switch & Double Pole x 2 230VAC Outlet||*|
|CMS 230VAC 15A RCD Protected Inlet with 5M cable to connect to Inverter/Charger||*|
|Individual Load/Charge Module for Simarine. (#SI-SCQ50)||*|
|Water/Fuel Tank Module for Simarine. (#SI-ST107)||Optional|
|Dimensions||760L x 155W x 510Hmm|
|(*) Indicates Standard Fitment|